Printer Thinker

Basic printer help

Canon BJC-3000, BJC-6000, BJC-6100, BJC-6200, S400, F300, F600, F620, BJC-7000, BJC-7100, BJC-8000, BJ-F800, i6500 Waste Ink Tank Reset Instructions

By: Printer Thinker - 16 January 2012

Every time your printer runs a head cleaning routine, it takes ink from the cartridge, and forces it through the print head in order to try and clear any blockages. This ink ends up in the waste ink tank.

After you have printed a certain number of pages, the printer will automatically say that the waste ink tank is full, invariably though, it isn’t anywhere close to being full.

You can reset this page counter by following the instructions below.

Please note, you do this at your own risk, if your waste tank is nearly full, you could soon have a lot of ink all over your desk!

  1. Turn the power off
  2. While holding down the Resume button, press and hold the Power button. The green LED will light up
  3. While holding down the Power button, release the Resume button
  4. Double-click the Resume button and release the Power button (The indicator blinks in orange/green every time the Resume button is pressed)
  5. When the indicator lights stop blinking, press the Resume button 3 times
  6. Press Power to confirm