- Model - Octo Twist Trinket Box
- Printer - Creality Ender 3
- Resolution - 0.2
- Infill - 0%
- Top Layers - 0
- Bottom Layer Pattern - Octogram Spiral
- Printed on a glass bed
Import the base and lid in to PrusaSlicer. I used a 0.2 layer height with 3 perimeters, no top layers and 0% infill. You can change these settings by following the instructions below:
Once imported, under "print settings" > "infill"
change the "fill density" to "0%" change the "bottom fill pattern" to "octogram spiral"
under print settings > "layers and perimeters"
change "perimeters" to 3 change "solid layers top" to "0" change "solid layers bottom" to "5"
Now, slice the models, and you should have something that looks similar to the picture below. Only the bottom layers and perimeters will be printed.
If you look on the underside, there will be an excellent octogram spiral pattern.
Now print your very own trinket box, take a look at the small gallery below!